How do I set the pressure limit and change to pulse-free mode on the ENO-30?

Please see excerpt below from the ENO-30 user manual (p.20) for setting the pressure limit and toggling pulse-free mode. The pressure limit can be set anywhere from 0-20 MPa, but is typically set between 10-15 MPa.  Pulse-free mode should always be 'ON' for analysis, but can be toggled off temporarily during maintenance or troubleshooting.

D
Derek is the author of this solution article.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.