MI-AZ, MI-PEP, Injection Needle, Cannula Information

njection cannula position: We can make the injection cannula tip as you want. Either at the tip of membrane, at the middle of membrane or boarder between the membrane and the shaft. When you place order, please let us know. Popular one is at the middle of the membrane, half of the membrane.

Dead Volume: The injection cannula has 0.075 mm for its internal diameter. Even if it has 10 cm from the inlet, the internal volume is 0.044 µL (micro liter)

As you can neglect the dead volume of the injection cannulae, you can slowly introduce the drug after inserting the probe through a guide cannula. Typical flow rate is 0.1-0.5 µl/min.

Derek is the author of this solution article.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.