What do you need help with?
Eicom Solutions
HTEC-500/510
- A sine wave over several minutes on the chromatogram is found during monitoring the baseline of the ECD. HTEC-500
- Auto Zero: Confirming the connection between AS-700 and HTEC-500/510
- Baseline wanders, drifting.
- Broad peaks with a manual injection
- Clogged Degasser
Eicom Support Videos
ENO-20/30
- A large negative peak before nitrite is interfering with the nitrite peak with biological samples, what causes this?
- ENO-20 does not start. Sequencer Error
- ENO-20/30 NOx Analyzer shows Error 3
- ENO-20 restoration
- ENO-20/30 Shortened Retention times for tissue or blood Samples
Microdialysis
- Antioxidant for catecholamines (norepinephrine, dopamine) and serotonin
- What is the number on the package for RT-5S tubing used for the ERP-10 roller pump?
- How to calculate dead volume of microdialysis probes
- MI-AZ, MI-PEP, Injection Needle, Cannula Information
- Ringer's Solution, aCSF Composition, Recipe
Autosampler AS-700
- AS-700 Cooling System does not work.
- Vials With Autosampler AS-700
- Partial Loop vs. Microliter Pickup Injection methods
- Different or large solvent front peaks with autosampler.
- Glutamate/GABA OPA Derivatization Autosampler Method Description
EAS-20 Autoinjector
Chromatography Software
- How to separate a rider peak (smaller overlapping peak)
- Can we move the data file folders to the desktop in Clarity?
- What OS is compatible with Clarity Chromatography Software?
- How do I install Clarity?
- Log4j vulnerability - Clarity not affected
Eicom Manuals to Download
BRC Product Solutions
LED Array FAQs
- Voltage-Light Power Relationship for White LED
- Q: What colors are available for the array?
- Q: What is the output for the array?
- Q: What are the dimensions of the LEDA-X array?
- Q: Do you know if the light power is uniform between and within each well in the 96 well plate? Most LEDs have a cone-like spread, so I was wondering if the cone covered the full surface of cells in each well.
Teleopto Optogenetics FAQ
Wireless Optogenetics FAQs
- Q: How wide is the cone of light produced by the fiber optic implant?
- Q: How close together can the two fibers of a bilateral LED implant be?
- Q: This system is almost perfect for us, but would be more ideal with customizable options - can you tailor it to meet our specific needs?
- Q: Which receiver should I choose, pulse type,continuous type, or OptoFlash?
- Q: How long will a wireless receiver keep powering the LED before the rechargeable battery is exhausted?
ELG-2 data logger for EEG and EMG
TeleFipho FAQs
O'Hara Solutions
Strex Solutions
Solutions for Strex Cell Stretch Systems
- Does autoclaving affect cell adhesion on Strex stretch chambers?
- Can we reuse the Strex stretch chambers?
- What are the materials and characteristics of the Strex stretch chambers?
- Is a uniform stress load applied on every cell in the Strex stretch chamber?
- What is the difference in cell response between sustained stretching and cyclic stretching?
Solutions for Strex Controlled Rate Freezer
- What is the system capacity for cryogenic vials of the Strex Controlled Rate Freezer?
- What is the Minimum Velocity of Freezing that the Strex Controlled Rate Freezer Provides?
- What is the Maximum Velocity of Freezing for the Strex Controlled Rate Freezer?
- What is the benefit of using a Strex Stirling Cooler system vs. a freezer that uses liquid nitrogen?
- What happens if there is a power outage during use of the Strex Controlled Rate Freezer?
Strex User Manuals for Download
Solutions for Strex Pressure Devices
Tomy Solutions
Tomy Autoclave Solutions- ES Series
- No display appears on the control panel of the ES Tomy Autoclave
- Steam leaks from the chamber lid of the Tomy ES autoclave
- Sterilization is not performed sufficiently for the Tomy ES series autoclave
- The pressure does not rise in the ES Tomy autoclave
- The chamber lid cannot be opened after sterilization using the ES Tomy autoclave
Tomy Autoclave Solutions- SX Series
- Tomy Autoclave SX Series Error Codes
- Nothing is displayed on the Tomy SX autoclave, even with the power supply switch turned ON.
- Temperature rises slowly for the Tomy SX Autoclave
- Sterilization is not carried out sufficiently
- Steam leaks from the chamber lid of the Tomy SX series autoclave
Tomy Centrifuge Solutions-MX Series
- No display appears on the control panel for the Tomy MX Centrifuge
- The Tomy MX Centrifuge abnormally vibrates and/or makes a loud sound.
- The Tomy MX Autoclave does not start running.
- The Tomy MX Autoclave does not properly cool down.
- The Tomy MX Centrifuge chamber lid does not open.