How to Inject Samples From a Manual Injector When an AS-700 Autosampler is set up With an ENO-20/30

Eicom Knowledge Base | ENO-20 | ENO-30 | How to guides

Purpose

This article outlines the proper set up and procedure for using a manual injector while the ENO-30 is connected to an autosampler.

Solution

Please set the manual injector in the upstream of autosampler. When you want to inject sample or standard from the manual injector, please turn the autosampler valve to Load position from the autosampler software window, then turn off the power of the autosampler and re-connect the connecter (electric) underneath of manual injector. (This connection should be disconnected while using autosampler.)  At this situation, you can inject samples from manual one.

 

Was this article helpful?
YesNo

Did you find what you were looking for?

Contact Support