How do I set the Pressure Limit and Change to Pulse-Free Mode on the ENO-30?

Eicom Knowledge Base | ENO-30 | How to guides

Purpose

This article outlines the process to set the pressure limit for the pumps on the ENO-30.

Solution

Please see excerpt below from the ENO-30 user manual (p.20) for setting the pressure limit and toggling pulse-free mode. The pressure limit can be set anywhere from 0-20 MPa, but is typically set between 10-15 MPa.  Pulse-free mode should always be ‘ON’ for analysis, but can be toggled off temporarily during maintenance or troubleshooting.

Was this article helpful?
YesNo

Did you find what you were looking for?

Contact Support