How do I Install Clarity?

Chromatography Software | Eicom Knowledge Base | How to guides

Purpose

This article explains how to install Clarity from the manufacturer’s website and set up the software to communicate with the hardware.

Solution

In order to install Clarity chromatography software, please  use the CD or silver flash drive that came with the original installation containing the software.  If you are unable to locate the CD or flash drive containing the written software, you can download Clarity directly from the software manufacturer’s website (registration required).

You can download the latest version of Clarity (Envision) here:

Please install the full version.  Please note registration is required.

 

There are 2 hardware keys supplied. Please use the key with an attached card labeled “P/N C50”. This key will run the HTEC HPLC.

 

 

The second hardware key, labeled “offline”, “p/n C59”  will only install software for data analysis.

 

Clarity configuration is described in the Clarity manual.

 

 

1. Choose default installation locations

 

2. Choose Components window:

 

(unchecking these unneeded components will make the installation much quicker)

 

Uncheck LC Control

 

Uncheck Instrument Control Framework

 

For AS Control:

 

All unchecked except for: Spark Holland Alias

 

Uncheck Detector Control

 

Universal Drivers: Check

 

For Hardware: leave as default (checked: U-Pad, U-Pad2, Colibrick)

 

Utils: leave as default

 

3. Hardware Setup Window:

 

Choose Colibrick

 

4. When prompted for a user code, it is printed on the card attached to the USB key

Was this article helpful?
YesNo

Did you find what you were looking for?

Contact Support