Hardware Articles

Microdialysis Guide Cannulae or Implants are Falling off of the Skull.

This article outlines procedures to take to improve adhesion of implants to the skull of specimens.

This article outlines potential causes of differing front solvent peaks as well as a resolution to making the peaks consistent.

This article explains the method to remove bubbles in the tubing that originate from the degasser.

This article outlines the steps to boot up the ENO-20 through reprogramming of the sequencer within the detection oven.

This article outlines a resolution to a clogged mixer in the ENO-30 by sonicating the mixer.

This article outlines the causes for error 03 and the steps to take to fix the issue.

This article outlines why pump pressure could be low, as well as the resolution to increasing the pressure through purging air.

This article presents a potential remedy to a clogged degasser.

This article explains how to lower the background current (BGC) by changing physical parts, manipulating settings, and cleaning.

This article outlines hardware causes of a lack of flow within the HTEC system.

This article outlines a quick solution to having high noise when using the Acetylcholine or Glutamate application.

The causes and resolutions of high pump pressure are outlined within this article.