FAQs Articles

Is the ELG-2 a 2 Channel Data Logger?

Yes. The ELG-2 is 2 channel data logger and can record EEG in ch1 and EMG in ch2, vice versa.

We recommend sterilizing the cannulae either by gas or UV.

This article explains the latency for activating the original pulse receiver, continuous receiver, and the 2 channel receiver.

The limitations of LED control and pulsations are outlined within this article.

The maximum polling rate for pulses ranges from 1000 Hz to 450 Hz depending on how many channels are active.

For the new 2g (2 gram) receiver it is 28 hrs. For the original 2g receivers it is 24 hrs.

The battery life depends on multiple factors, and can be calculated by Amuza if requested.

We are able to customize the system to suit your requirements, often without additional cost.

This article explains under which circumstances which receivers to use to ensure for proper data transmission and longevity.

The distance, from center to center, for the LED implants are listed within this article.

A recommendation for black well plates to minimize light carryover is detailed within this article.

The area of the detector is 5.5mm x 4.8mm. = 26.4 square millimeters.