The VTS-4 can only be used to control the timing of stimulation, while the LAD-1 is needed to control intensity.
Can the VTS-4 Also be Used to Control the LAD4?
read more
LED Array Articles
Can we Split the Signal From one Channel of the STO Pulse Generator so That it Controls 2 Channels on the LAD4?
The signal can be split with the use of a different cable.
What is the Length of the Cable That Connects the Array to the Driver?
The cable length is 2 meters long.
What is the Maximum Voltage Output of the LED Array Driver?
The maximum voltage of the LAD-1 is 13.5V.
Is the Light Power Uniform Between and Within Each Well in a 96-Well Plate?
This article explains the angle of emitted light as to cover 96-well plates.
What are the Dimensions of the LEDA-X Array?
The dimensions are 144 x 100 x 16 mm.
What is the Output for the LED Array?
This article outlines the stepless power output from the LAD driver either through the knob on the front panel or by an analog trigger pulse.
What Colors are Available for the LED Array?
This article lists out LED colors that are offered on the LED array. The wavelengths range from infrared to violet.
What is the Voltage-Light Power Relationship for White LEDs?
The article contains a document outlining a somewhat linear relationship between light power and voltage for both TRG and Const modes, as well as some safety recommendations when using TRG mode.